A study on a hybrid-composite prepared using Areca Nut Husk Fibre, Glass Fibre Cloth, and Epoxy Resin

Abstract

The demand for natural fibres has increased in recent years due to their low density, excellent biodegradability, stiffness, and cost-effectiveness. Natural fibre composites are widely used in various engineering applications, including the marine, construction, aerospace, and automotive industries. The present research work highlights the fabrication of natural composites by using areca nut husk and glass fibre dispersed in epoxy resin by the hand lay-up technique. The fabricated composites are then tested to determine the mechanical properties. The examined composites exhibited a hardness of 55 BHN and a porosity of 92.5%. The density of the composite ranges from 0.3808 to 0.4075 g/cm³.